Toshiba TE-18-BP Quick Start Up Manual page 31

Basic Installation and Operation Guide
Fn # Group Function Description
F040 Current Imbalance Trip
F041 Current Imbalance Trip Delay
F042 Over Current Trip
F043 Over Current Trip Delay
F044 Under Current Trip
F045 Under Current Trip Delay
F046 Ground Fault Trip
F047 Ground Fault Trip Delay
Coast Down (Back Spin)
F048
Lockout Timer
F049 Maximum Starts per Hour
F050 Minimum Time Between Starts 0 = Disabled, or 1 - 60 minutes
F051 Internal Protection Settings
Auto Reset
F052
on Selected Faults
F053 Auto Reset Attempts
Restart Delay Time Value
F054
Readout (for F028)
Coast Down Timer Value
F055
for F048
Starts Per Hour Timer Value
F056
for F049
Starts Per Hour
F057
For F049
Time Value Between Starts
F058
for F050
Thermal Capacity to Start
F059
for F005
F060 Aux Relay 1 setting
F061 Aux Relay 2 setting
F062 Aux Relay 3 setting
Aux. Relay Delay Timer
F063
(for Operations 22-26)
F064 Reserved for factory use
26 | P a g e
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
TE Series Digital Solid State Soft Starters 18 – 1250A
Adjustment / Display Range
0 = Disabled, or
5 - 30% imbalance
1 - 20 seconds
0 = Disabled, or
100 - 300% of motor FLA
1 - 20 seconds
0 = Disabled, or
10 - 90% of motor FLA
1 - 60 seconds
0 = Disabled, or
5 - 90% of CT ratio from Fn 74
1 - 60 seconds
0 = Disabled, or 1 - 60 minutes
0 = Disabled, or 1 – 10 starts
1 – 255
Fault Preferences 1 – 12
See Fault Reset Selection Table
0 = Disabled, or 1-10 attempts
0-999 Seconds
1-3600 Seconds
1-3600 Seconds
1-10 Starts
1-3600 Seconds
0-100 % Thermal Capacity
Operation # 1 – 27: see
"Aux. Relay Settings Chart"
Operation # 1 – 27: see
"Aux. Relay Settings Chart"
Operation # 1 – 27: see
"Aux. Relay Settings Chart"
0 (Disabled), or 1-999 seconds
Setting Factory
Setting
Increments Setting
1% 0 Disabled
1 second 2 seconds
1% 0 Disabled
1 second 1 second
1% 0 Disabled
1 second 2 seconds
1% 0 Disabled
1 second 2 seconds
1 minute 0 Disabled
1 0 Disabled
1 minute 0 Disabled
1 126
4:
1 Phase Loss
only
1 1
1 0
1 0
1 0
1 0
1 0
1 0
1 1
1 2
1 16
0
1 second
No Delay