Toshiba TE-18-BP Quick Start Up Manual page 30

Basic Installation and Operation Guide
Fn # Group Function Description
Pump Flex Control /
F024
Deceleration Ramp
Begin Decel Level (BDL),
F025
Immediate Drop Down Torque
F026 Decel Shut Off Voltage
F027 Decel Ramp Time
Restart Delay Time
F028
(Sequential Start Delay)
F029 Reserved for Factory Use
25 | P a g e
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
TE Series Digital Solid State Soft Starters 18 – 1250A
Adjustment / Display Range
0 = Disabled (coast to stop)
1 = Enabled, except after OL trip
2 = Enabled, continued Decel even
if there is an OL trip
0 - 100 % of Output Voltage
0 to (BDL minus 1)% Voltage
1 – 60 Seconds
0 = Disabled, or
1-999 seconds after a Power Loss
(Status can be read in F054)
Setting Factory
Setting
Increments Setting
1 0 Disabled
1% 60%
1% 30%
10
1 second
seconds
1 second 0 Disabled