Scalance X101-1Fl Tp Port - Siemens SCALANCE X101-1 Commissioning Manual

Product Characteristics
4.3 SCALANCE X101-1FL
4.3.4

SCALANCE X101-1FL TP Port

Connector Pinout
RJ-45 jack
Figure 4-8
Pin number Pinout
Pin 8
Pin 7
Pin 6
Pin 5
Pin 4
Pin 3
Pin 2
Pin 1
On SCALANCE X101-1FL, the twisted pair port is implemented as RJ-45 jack with MDI-X
assignment (Medium Dependent Interface–Autocrossover) of a network component.
Notice
TP cords or TP-XP cords with a maximum length of 10 m can be connected to the RJ-45 TP
port.
Depending on the cable type, a total cable length of up to 100 m is permitted between two
devices with the IE FC cables and IE FC RJ-45 plug 180.
Note
The SCALANCE X101-1FL works with a fixed transmission speed of 10 Mbps in half duplex.
Devices not supporting autonegotiation must be set to 10 Mbps half duplex.
4-16
RJ-45 connector pinout
NC
NC
TD-
NC
NC
TD+
RD-
RD+
Industrial Ethernet Media Converters SCALANCE X-100 Series
Commissioning Manual, 07/2008, A2B00051521A