Siemens SCALANCE X101-1 Commissioning Manual page 67

Uninstalling
To remove the media converter from the DIN rail:
Figure 5-2
Industrial Ethernet Media Converters SCALANCE X-100 Series
Commissioning Manual, 07/2008, A2B00051521A
First disconnect the TP cable and the FO cables. Remove the terminal block for the
1.
power supply and the signaling contact.
Use a screwdriver to release the lower rail catch of the device and pull the lower part
2.
of the device away from the rail.
Removing from a DIN rail (35 mm)
Installation and Maintenance
5.1 Installation
5-3