1.13 Residual hazards
In normal use the external surface of the product may be very hot. If used at the maximum
permitted operating conditions the surface temperature of some products may reach temperatures
in excess of 300 °C (572 °F).
Many products are not self-draining. Take due care when dismantling or removing the product
from an installation (refer to 'Maintenance instructions').
1.14 Freezing
Provision must be made to protect products which are not self-draining against frost damage in
environments where they may be exposed to temperatures below freezing point.
1.15 Safety information - Product specific
See relevent Sections of the attached Installation and Maintenance Instructions for specific
details relating to these products.
1.16 Disposal
Unless otherwise stated in the Installation and Maintenance Instructions, this product is
recyclable and no ecological hazard is anticipated with its disposal providing due care is taken.
1.17 Returning products
Customers and stockists are reminded that under EC Health, Safety and Environment Law, when
returning products to Spirax Sarco they must provide information on any hazards and the
precautions to be taken due to contamination residues or mechanical damage which may present
a health, safety or environmental risk. This information must be provided in writing including
Health and Safety data sheets relating to any substances identified as hazardous or potentially
hazardous.
4
IIM-P067-06 CMGT Issue 4