General Product Information - Spirax Sarco 600 Series Installation And Maintenance Instructions Manual

2. General product information

2.1 Description
The Spirax Sarco 600 and 900 series alloy steel inverted bucket steam traps are designed for installation
in vertical pipework between flanges. They are suitable for a wide range of pressures and applications and
include an integral check valve on the inlet.
Certification
The product is available with material certification to EN 10204 3.1.B as standard.
Certification must be specified at the time of order placement.
2.2 Sizes and pipe connections
600 series
DN15 - 621, DN20 - 622, DN25 - 623, DN40 - 625 and DN50 - 626
In all sizes the body and cover forgings form the inlet and outlet flanges.
The drilled holes in both inlet and outlet flanges are tapped to receive bolts.
ASME flanges are tapped UNC. BS 4504 and DIN flanges are tapped metric.
Flanges meet the requirements of ASME 150, 300 and 600, BS 4504 and DIN PN25 and PN40.
BS 10 flanges can be supplied on request.
900 series
DN15 - 921, DN20 - 922, DN25 - 923, DN40 - 925 and DN50 - 926.
In all sizes the body and cover forgings form the inlet and outlet flanges.
The drilled holes in both inlet and outlet flanges are tapped to receive bolts.
ASME flanges are tapped UNC. BS 4504 and DIN flanges are tapped metric.
Flanges meet the requirements of ASME 600 or PN64. BS 10 flanges can be supplied on request.
Fig. 1
IIM-P067-06 CMGT Issue 4 5