Engine Oil Filling - Royal Enfield Interceptor 650 2018 Owner's Manual

MINOR MAINTENANCE TIPS
NOTE
Ensure the engine oil is drained completely. Drain the oil completely and to avoid oil spilling.

ENGINE OIL FILLING

n Place a container under engine oil drain bolt.
n Gently apply thread sealant on drain plug thread.
n Insert the drain plug bolt along with new washer.
Tighten the drain plug bolt to 35 Nm.
n
Refill the engine oil recommended level.
n
n Close engine oil filler cap.
n Start and warm up engine for 2 to 3 minutes and then turn it off. Check oil level
through oil level window.
CAUTION
DO NOT over fill engine oil as excess oil will spill over through the crankcase
breathing system and clog the air filter.
67