MINOR MAINTENANCE TIPS
FRONT WHEEL REASSEMBLY
n Remove the wooden piece / cardboard sheet placed between the brake pads
n Locate speedo drive to its correct position on the right side.
n Locate stepped spacer to the wheel hub on left side.
n Insert the wheel along with speedo drive and spacer between the fork ends. Ensure the
brake disc is located between the brake pads.
n Support front wheel at the bottom and ensure the mounting holes are aligned to insert
the wheel axle along the right side fork end. Gently tap axle into wheel till the threaded
portion of axle is fully visible on the left side fork end.
n Assemble washer and nut on axle.
n Hold the wheel axle firmly on right side and tighten axle nut firmly on left side to a
torque of 70 Nm.
n Tighten pinch bolt completely on fork end to a torque of 25 Nm.
73