Supplement Section 5: Raising/Lowering The Tub Platform, Raising/Lowering The Discharge Conveyor, And Folding/Unfolding The Discharge Conveyor - Haybuster H-1130 Operating Instructions And Parts Reference

Supplement Section 5: Raising/lowering the tub platform, raising/lowering the dis-
charge conveyor, and folding/unfolding the discharge conveyor.
A 10Hp electric motor powers a hydraulic pump which provides hydraulic oil to raise/lower the tub platform, raise/
lower the discharge conveyor, and fold/unfold the discharge conveyor. The conveyor function valve is located on the
left hand side of the machine while the tub platform valve is located on the right hand side.
Activating a lever on either valve will start the electric motor which provides oil to the circuit. If the rotor is turning the
tub platform cannot be raised/lowered. The rotor must come to a complete stop before the tub platform valve will turn
on the pump. The rotor status can be found on the indicator lights below the tub platform valve. The conveyor valve
will operate regardless of the rotor status.
79
H - 1 1 3 0 T U B G R I N D E R O P E R A T I N G I N S T R U C T I O N S