Screens - Haybuster H-1130 Operating Instructions And Parts Reference

3.3

Screens

CHANGING SCREENS
CAUTION: Keep all foreign objects out of the tub and away from the rotor. Foreign objects may
cause personal injury or damage to the machine.
CAUTION: Follow normal shutdown procedure before entering tub to do any service work.
To change screens on the H-1130, perform the following steps:
1. Raise the tub platform using the following steps
WARNING: To prevent serious injury or death, do not tilt platform on unlevel ground or with
material in the tub.
WARNING: For your protection ALWAYS install the tub cylinder stop or tub prop when the tub is
tilted. NEVER engage tractor PTO when the tub is raised.
a. Park machine on level ground or surface.
b. Remove all material from tub.
c. Clear personnel from work area.
e. Raise platform.
f. Install tub cylinder stop.
2. Loosen and remove bolts on the screen hold down.
3. With a large hook or bar, pull the screen from its chamber.
4. Make sure material is clear from screen track.
5. Install the new screen.
6. Replace the screen hold down, and bolts.
7. Tighten all bolts securely.
52 H - 1 1 3 0 T U B G R I N D E R O P E R A T I N G I N S T R U C T I O N S
screen
screen hold downs
screen hold down
bolts