Supplement Section 2: Start-Up (For S.n. 0651 And Up) - Haybuster H-1130 Operating Instructions And Parts Reference

Supplement Section 2: Start-Up (For S.N. 0651 And Up)

Warning: Make sure that all safety measures have been taken before switching on the power supply.
1. Before starting the H1130 Electric Tub Grinder
make sure that "Start" switch in the control panel
is set on "SS".
2. Shout the word "CLEAR"
Note: Next step will bring grinder up to full operating RPM
3. Then press the start button on the outside of the
control panel.
Note: Electric motor will not start if platform is raised.
74
Start button
(green button)
H - 1 1 3 0 T U B G R I N D E R O P E R A T I N G I N S T R U C T I O N S