Conveyor Speed Control - Haybuster 2650 Operating Instructions Manual

figure 3.1
P.T.O. shield, working
(lowered) position,
latched maintenance
(raised) position.
P.T.O. shield maintenance
(raised) position

3.3.3 Conveyor Speed Control

Moving the lever on the conveyor speed control valve
counterclockwise will slow the conveyor and make a
finer product. Moving the lever clockwise will speed up
the conveyor and make a coarser product.
For tractors with PFC type hydraulic systems, this
valve should be set in the full open position (clockwise
rotation). Conveyor speed can then be controlled
directly from the tractor controls.
figure 3.2
position of the flow
control valve
18
flow control valve
2 6 5 0 / 2 6 5 5 B A L E B U S T E R
P.T.O. shield hold
down latch
P.T.O. shield working (lowered)
position
O P E R A T I N G I N S T R U C T I O N S