Viewing Pictures From Connected Equipment - Sony BRAVIA 4-136-111-12(1) Operating Instructions Manual

Viewing Pictures from
Connected Equipment
Turn on the connected equipment, then
perform the following operation.
1
Press .
2
Press F/f to select
the desired input
source, then press
For equipment connected to the scart
sockets using a fully-wired 21-pin scart lead
Start playback on the connected equipment.
The picture from the connected equipment
appears on the screen.
For an auto-tuned VCR
In analogue mode, press PROG +/– or the
number buttons, to select the video channel.
To view two pictures simultaneously
– PAP (Picture and Picture)
You can view two pictures (external input and
TV programme) on the screen simultaneously.
~
• This function is not available for a PC input.
1
Press OPTIONS.
2
Press F/f to select "PIP/ PAP", then press
.
3
Press F/f to select "PAP", then press
The picture from the connected equipment
is displayed on the left, and the TV
programme is displayed on the right.
4
Press the number buttons or PROG +/– to
select the TV channel.
To return to single picture mode
Press RETURN.
24
GB
.
.
To view two pictures simultaneously
– PIP (Picture in Picture)
You can view two pictures (external input and
TV programme) on the screen simultaneously.
1
Press OPTIONS.
2
Press F/f to select "PIP/ PAP", then press
.
3
Press F/f to select "PIP", then press
The picture from the connected PC is
displayed in full size, and the TV
programme is displayed in the small
screen.
You can use F/f to change the position of
the TV programme screen.
4
Press the number buttons or PROG +/– to
select a TV channel.
To return to single picture mode
Press RETURN.
z
• You can switch the audible picture by pressing G/
g.
.