Do you have a question about the KDL-32V5500 and is the answer not in the manual?
Questions and answers
G M Jayawardena
February 3, 2025
TV was OK last night. Today when plugged in hear some relay operation but unable to switch on power on led not lighting
1 comments:
Mr. Anderson
February 10, 2025
The issue could be related to the power supply or internal components. Try the following steps:
1. Unplug and Reset – Disconnect the mains plug for a few minutes, then plug it back in and try turning it on. 2. Check Power Connections – Ensure the power cable is securely connected and the outlet is working. 3. Inspect for Overheating or Damage – If the insulation has deteriorated, it could cause power issues. 4. Use a Sony Wall-Mount Bracket – This ensures proper air circulation, preventing overheating. 5. Internal Component Failure – If the issue persists, components like the power board or main board may need inspection or replacement.
If none of these steps work, professional servicing may be required.
Need help?
Do you have a question about the KDL-32V5500 and is the answer not in the manual?
Questions and answers
TV was OK last night. Today when plugged in hear some relay operation but unable to switch on power on led not lighting
The issue could be related to the power supply or internal components. Try the following steps:
1. Unplug and Reset – Disconnect the mains plug for a few minutes, then plug it back in and try turning it on.
2. Check Power Connections – Ensure the power cable is securely connected and the outlet is working.
3. Inspect for Overheating or Damage – If the insulation has deteriorated, it could cause power issues.
4. Use a Sony Wall-Mount Bracket – This ensures proper air circulation, preventing overheating.
5. Internal Component Failure – If the issue persists, components like the power board or main board may need inspection or replacement.
If none of these steps work, professional servicing may be required.
This answer is automatically generated