Sony BRAVIA 4-136-111-12(1) Operating Instructions Manual page 43

Radio Display
Parental Lock
PIN Code
Technical Set­up
Programme Allows you to remove or change the order of digital channels
Sorting
stored in the TV.
1
2
3
Digital Manual
Tunes the digital channels manually. This feature is available
Tuning when "Digital Auto Tuning" is set to "Antenna".
1
2
3
Repeat the above procedure to tune other channels.
LNA Improves the picture quality of the channel (noisy picture)
when the broadcast signal is very weak.
Displays the screen wallpaper when you listen to a radio broadcast. You can select
the screen wallpaper colour, display a random colour or view a slideshow (page 25,
30). To cancel the screen wallpaper display temporarily, press any button.
Sets an age restriction to viewing. To view any programme rated for ages above
the age you specify, enter the correct PIN code.
Enter your PIN code to activate "Parental Lock". You can also change the PIN
code.
z
• PIN code 9999 is always accepted.
Auto Service Enables the TV to detect and store new digital services as
Update they become available.
System Update Enables the TV to automatically receive free software
updates through your existing aerial/antenna/cable (when
issued). We recommend that you leave the setting to "On" at
all times.
System Displays the current software version and the signal level.
Information
Time Zone Allows you to manually select the time zone you are in, if it is
not the same as the default time zone setting for your country/
area.
Auto DST Select "On" to automatically switch between summer time
and winter time according to the calendar.
Service Select "On" to automatically change the channel when
Replacement broadcaster changes transmission of the viewing programme
to a different channel.
Programme You can switch GUIDE (Sony Guide or GUIDE Plus+). If
Guide (only when you change Sony Guide to GUIDE Plus+ programme, go to
GUIDE Plus+ is (page 17, 20).
available)
Press F/f to select the channel you want to remove or
move to a new position.
Remove or change the order of the digital channels as
follows:
To remove a digital channel
Press . After a confirmation message appears, press G
to select "Yes", then press
To change the order of the digital channels
Press g, then press F/f to select the new position for the
channel and press G.
Press RETURN.
Press the number buttons to enter the channel number
you want to tune, or press F/f.
When the available channels are found, press F/f to
select the channel you want to store, then press
Press F/f to select the channel number where you want
to store the new channel, then press
.
.
.
43
GB