Viewing Pictures from
Connected Equipment
Switch on the connected equipment, then
perform one of the following operation.
For equipment connected to the scart
sockets using a fully-wired 21-pin scart lead
Start playback on the connected equipment.
The picture from the connected equipment
appears on the screen.
For an auto-tuned VCR/ DVD recorder
In analogue mode, press PROG +/–, or the
number buttons, to select the video channel.
For equipment connected to MONITOR
HDMI socket
Press MONITOR HDMI.
For other connected equipment
Press
/
to display a list of connected
equipment. Press F/f to select the desired
input source, then press
.
The highlighted item is automatically selected
if you do not perform any operation for two
seconds after pressing F/f.
If you have set an input source to “Skip” in the
“AV Preset” menu (page 32), that input source
does not appear in the list.
z
• To return to normal TV mode, press DIGITAL/
ANALOG.
Using the Options menu
Press OPTIONS to display the following
options when viewing pictures from connected
equipment.
When equipment is connected to the media
receiver sockets
Option
Description
Picture Mode (except
See page 39.
PC/HDMI PC input
mode)
Sound Mode
See page 41.
Speaker
See page 32.
Motionflow (except
See page 40.
PC/HDMI PC input
mode)
GB