Installation -Refrigerator - Bunn SURE TAMP SERIES Installation & Operating Manual

INSTALLATION-REFRIGERATOR (AUTO MODELS ONLY)
Milk Module Installation-counter top
1. Align hoses and harnesses through holes
in back of refrigerator and slide module into
cabinet on the pre-installed brackets.
Milk Module Installation-under counter
1. Align hoses and harnesses through hole
on top of refrigerator and slide module into
cabinet on the pre-installed brackets. Ensure
holes in back are plugged.
D
B C
A
INSTALL SUPPLY LINES
Load milk containers.
A. Load a container of "non fat" milk towards the back
and insert the number "2" hose into container.
B. Load a container of "regular" milk towards the front
and insert the number "1" hose into container.
NOTE: Use either dairy or non dairy - not a mixture.
E
Connect hoses and harnesses to machine as shown.
A. Water supply to espresso machine.
B. Water line to milk module.
C. Milk line from milk module.
D. 8 pin connector from milk module.
E. 14 pin connector from milk module.
1
Load milk containers.
A. Adjust refrigerator thermostat control knob as needed.
B. Temperature may be monitored with the thermometer
hanging inside the cabinet (1). Range: 38°F to 43°F.
Refer to manufacturers manual included with refrigerator
for additional information.
Page 8
51624 042115