Operation-Build-A-Drink - Bunn SURE TAMP SERIES Installation & Operating Manual

1. Americano (hot water added to espresso).
2. Cappuccino (traditionally prepared with espresso, hot milk, and steamed-milk foam).
3. Espresso: x1=single shot; x2=double shot; x3=triple shot (coffee brewed by forcing a small
amount of nearly boiling water under pressure through finely ground coffee).
4. Latte (hot milk added to espresso with a dollop of foam) (Auto only).
5. Macchiato: espresso added to a small amount of milk foam (Auto only).
6. Milk (hot milk for hot chocolate) (Auto only).
7. Syrup icon leaves room in the drink volume to allow manually adding syrup without overflowing the
cup.
8. Select "cup preheat" to dispense hot water into cup before running a brew cycle.
DO NOT USE CUP PREHEAT WITH PAPER OR STYROFOAM (OR SIMILAR) CUPS.
1. Select between
2. Place appropriate size cup on drip tray or shelf.
3. Select drink size.
4. Select desired options:
for non fat milk or
for cold milk or
Syrup for additional room;
5. Select one of the drink types.
STOP: Pressing the STOP button will stop brewing function, and will reset unit back to ready mode.
NOTE: Empty puck drawer when prompted.
DO NOT ALLOW USED PUCKS TO BACK UP INTO BREW CHAMBER AREA AS THIS CAN
CAUSE DAMAGE!
OPERATION - BUILD-A-DRINK
DRINK TYPES
or bean hopper from the tabs on the top of touchscreen.
for regular milk (Auto only).
for hot milk (Auto only).
BREWING
STOP
Page 10
51624 042115