Installation - Bunn SURE TAMP STEAM Installation & Operating Manual

INSTALLATION

Drain Install
1. Install drip tray bracket with 3 screws (included in bag).
1. Attach the short drain hose to the drip tray fi tting.
2. Slide drip tray onto guide rails on front of machine.
3. Attach other end of drain hose to manifold as shown.
4. Attach long drain hose to back of manifold and route
to fl oor drain or sink, fl owing downhill at all times.
5. Secure hose above the drain to maintain the air gap.
Water Supply Install
1. Ensure water is turned off.
2. Install the water fi ltration system between the wa-
INSTALL DRAIN HOSE AND DRIP TRAY
ter supply and the machine inlet per manufacturer's
installation recommendations.
3. Connect one end of the inlet hose assembly to the
adapter and the other end to the water supply.
4. Turn on the main water supply. Check for leaks;
resolve any leak issues before proceeding.
Electrical Install
WARNING – Improper electrical installation will
damage electronic components.
1. Determine the available electrical service.
2. Ensure the proper voltage at the electrical source.
3. Uncoil the cord completely and install the cord
INSTALL DRAIN HOSES TO MANIFOLD
cap (not supplied) to the power cord. Black (L1) and
white/red (L2) and green (ground).
4. Plug securely into the outlet.
INSTALL WATER SUPPLY LINE
Page 5 45921 040114