Door Cover Installation - Bunn JDF-2S Installation & Operating Manual

DOOR COVER INSTALLATION

1. Install door cover by first plugging the door harness connector into the machine harness connector located
at the bottom of the machine door.
JDF-4S
JDF-2S P3577
2. On Portion Control models, connect membrane 3. Install door cover
switches to Door Circuit Board.
P3578
JDF-4S Shown JDF-2S & JDF-4S
4. Secure the door cover using 5 screws provided.
JDF-4S
P3840
JDF-2S
P3579
5
44744.2 110813