Location and Function
of Parts and Controls
Front / Rear / Side
Location and Function of Parts and Controls
1 Indicator section
For details on the Indicator section, see "Indicator
Section" on page 8 (GB).
2 Control button section
For details on the control button section, see "Control
Button Section (Top)" on page 8 (GB).
3 Stand installation hooks
Use these hooks to install the stand (not supplied).
4 SPEAKER Socket
Connects the speakers (not supplied) to this socket to
output the audio matching the signal displayed on the
5 - AC IN socket
Connect the supplied AC power cord to this socket
and to a wall outlet. Once you connect the AC power
cord, the POWER/STANDBY indicator lights up in
red and the display goes into the standby mode.
For more details on the power cord, see "Connecting the
AC Power Cord" on page 14 (GB).
6 Connector panel
For details on the connector panel, see "Connector Panel"
on page 9 (GB).