Table of Contents
Advertisement
Location and Function of Parts and Controls
7 COMPONENT/RGB IN (A BKM-FW11 is
preinstalled only in the FWD-42LX1.)
Y/G P
/C
/B P
/C
/R IN (BNC) : Connects to the
B
B
R
R
analog RGB signal or component (YUV) signal
output of a piece of video equipment or a
computer.
HD VD IN : Connects to the synchronization signal
output of a computer.
AUDIO (Stereo minijack) : Inputs an audio signal.
Connects to the audio output of a piece of video
equipment or a computer.
8 OPTION1 slot (VIDEO/COM port)
This slot supports video signals and communication
function.
9 OPTION2 slot (VIDEO port)
(Only for the FWD-42LX1/42LX1E)
This slot supports video signals. The optional adaptor
with communication function should be installed in
8 OPTION1 slot.
Optional adaptors (Not supplied)
The connectors marked with 6 and 7 on the
connector panel are slot-in types and can be fitted
with any of the optional adaptors in the display;
BKM-FW10, BKM-FW11 or BKM-FW12.
(A BKM-FW10 is the same as the connectors 6, and
a BKM-FW11 is the same as the connectors 7.) The
OPTION2 slot is equipped only on the FWD-42LX1/
42LX1E.
For details on installation, consult your Sony dealers.
10
(GB)
RGB/COMPONENT ACTIVE THROUGH
ADAPTOR BKM-FW12 (Not supplied)
1
2
3
1 RGB/COMPONENT IN (D-sub 15-pin) :
Connects to the component signal output or analog
RGB signal output of a piece of video equipment or a
computer.
2 RGB/COMPONENT OUT (D-sub 15-pin) :
Connects to the component signal input or analog
RGB signal input of a piece of video equipment or a
computer.
3 AUDIO IN (Stereo minijack) :
Inputs audio signal. Connects to the audio signal
output of a piece of video equipment or a computer.
For details on inputting a component signal to the
connector, see "Pin assignment" on page 42 (GB).
Note
When the unit is not connected to an AC power or is
in the standby mode, no signal is output from the
RGB/COMPONENT OUT.
Advertisement
Table of Contents
