MEDIATEK LinkIt Smart 7688 Developer's Manual page 52

and sign in, click the Configure button under System information and the following information
will display, as shown in Figure 32:
•
Device name
•
Current IP address
•
Account
•
Password
Figure 32 System Information in LinkIt Smart 7688 Web UI
4.6.7. Accessing the USB drive and the SD Card
When a USB drive or SD card is inserted into LinkIt Smart 7688, they can be accessed under
/Media/SD* or /Media/USB* (The device name displayed varies depending on the number of
drives you use and the number of partitions available on the USB drive or SD card).
You can use the following commands to check the contents of the USB drive and SD card:
•
In this example, a USB drive named
> ls /Media/USB-A1
•
In this example, a SD card named
> ls /Media/SD-P1
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
MediaTek LinkIt™ Smart 7688 Developer's Guide
USB-A1
is used:
SD-P1
is used:
© 2015, 2016 MediaTek Inc.
Page 52