MEDIATEK LinkIt Smart 7688 Developer's Manual page 41

A Security Alert window will pop up as shown in Figure 20 below, this happens when you
3)
use PuTTY for the first time, or after upgrading firmware or boot loader, or use a different
board. Click Yes.
In the PuTTY terminal window that opens, log in with username root and enter the
4)
password you set previously in the Web UI, after log in you should see a screen similar to
Figure 21.
• For Mac:
Open Terminal. In the Terminal, type ssh root@mylinkit.local at the command line, hit
return and you'll be prompted to enter the root password. Enter the password you set
previously in the Web UI.
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
MediaTek LinkIt™ Smart 7688 Developer's Guide
Figure 20 PuTTY Security Warning
Figure 21 System Console
© 2015, 2016 MediaTek Inc.
Page 41