MEDIATEK LinkIt Smart 7688 Developer's Manual page 51

Password

Open a system console and enter the following commands to change LinkIt Smart 7688
3)
to station mode:
In this example, the following AP is used:
AP SSID: MyAP

Encryption type: WPA2-PSK ( psk2)

Password: 12345678

# uci set wireless.sta.ssid=MyAP
# uci set wireless.sta.encryption=psk2
# uci set wireless.sta.key=12345678
# uci set wireless.sta.disabled=0
# uci commit
# wifi
Now check if you've established network connection by typing the following command in
4)
the terminal window:
# ping –c 5 www.mediatek.com
If you see a screen similar to Figure 31, congratulations, you've connected to the Wi-Fi
network's AP. The Wi-Fi LED will blink once every second indicating Station mode.
Figure 31 LinkIt Smart 7688 in Station mode connected to a Wi-Fi AP
4.6.6. Viewing System Information from the Web UI
You can view LinkIt Smart 7688's system information from any browser. After you've connected
the LinkIt Smart 7688 to a network, open a browser and type http://mylinkit.local in the URL box
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
Encryption
Open network
WPA-PSK
WPA2-PSK
WEP
Table 14 Wi-Fi AP Encryption Type
For more information on encryption types please check here.
© 2015, 2016 MediaTek Inc.
MediaTek LinkIt™ Smart 7688 Developer's Guide
UCI Command
string
none
psk
psk2
wep
Page 51