Linkit Smart 7688 Duo - MEDIATEK LinkIt Smart 7688 Developer's Manual

2.3.

LinkIt Smart 7688 Duo

The LinkIt Smart 7688 Duo development board is powered by the same MT7688AN SOC as the
LinkIt Smart 7688, but includes an ATmega32U4 MCU. This supports additional features including
Analog I/O support and Arduino IDE support. The board's functionality is therefore a combination
of that provided by the two chipsets: Wi-Fi and Ethernet are supported through OpenWrt Linux on
the MT7688AN SOC, and various peripheral supported through Arduino on the ATmega32U4
microcontroller.
2.3.1. Key Features
LinkIt Smart 7688 Duo's key features include:
•
1T1R Wi-Fi 802.11 b/g/n (2.4G).
•
Pin-out for GPIO, I2C, I2S, SPI, SPIS, UART, PWM and Ethernet Port.
•
580 MHz MIPS CPU.
•
32MB flash and 128MB DDR2 RAM.
•
USB host.
•
Micro SD slot.
•
Support for Arduino (ATmega32U4)
LinkIt Smart 7688 Duo is shown in Figure 7.
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
MediaTek LinkIt™ Smart 7688 Developer's Guide
© 2015, 2016 MediaTek Inc.
Page 19