MEDIATEK LinkIt Smart 7688 Developer's Manual page 38

Wi-Fi LED Status and System State
System
Boot loader
Power On Initializing
1 sec
Blink Once
Open the Wi-Fi connection utility on your computer and connect to the access point
2)
named LinkIt_Smart_7688, as shown in Figure 16.
After you've connected to LinkIt_Smart_7688 AP, the Wi-Fi LED will blink three times per
second.
If you have multiple LinkIt Smart 7688 boards, power only one of them to prevent name collision. An
alternative is to insert a micro SD card with a file name which contains the name of Access Point you
want to rename to.
Keep in mind that once you've connected to LinkIt Smart 7688, your computer may no
longer have access to the Internet – it is now joined the Local Area Network formed by
LinkIt Smart 7688, as shown in Figure 17. You'll learn how to connect LinkIt Smart 7688 to
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
MediaTek LinkIt™ Smart 7688 Developer's Guide
Linux
Boot Strapping
4-5 secs ~30 secs
Light Up
Figure 15 Wi-Fi LED Status
Figure 16 Connecting to LinkIt Smart 7688 AP
© 2015, 2016 MediaTek Inc.
AP Mode, w/o Client
Wi-Fi
AP Mode, w/ Client
Ready
3 blinks per sec, pauses 0.5
secs
Station Mode, Connecting
2 blinks per sec
Station Mode, Connected
Blinks as data's transmitting
Page 38