Installing The Z-Wave Module; Enrolling/Unenrolling The Network Module - Yale Real Living YRD220 Installation And Programming Instructions

Installing the Z -Wave
IMPORTANT: the batteries
to removing and/or inserting the network module:
• Remove battery cover.
• Remove batteries.
• Remove and/or insert network module.
• Reinstall batteries.
• Replace cover.

Enrolling/Unenrolling the Network Module:

It is recommended that lock is programmed through the centralized user interface (
hand-held device) to ensure communication between the lock and the controller unit. The
network controller first needs to be in enrollment or exclusion mode for the lock to be
enrolled or unenrolled from network.
To Enroll the Module:
• Enter the 4-8 digit Master
• Press the key followed by the
• Press the key followed by the
To Unenroll the Module:
• Enter the 4-8 digit Master
• Press the key followed by the
• Press the key followed by the
Yale Real Living Z
®
Installation and Programming Instructions
Module
®
must be removed prior
PIN code followed by the
key.
key.
PIN code followed by the
key.
key.
-Wave Module
® ®
key.
key.
P/N AYR 200- ZW INSTAL FUL -
PC or
- Rev C