Playback; Preparations For Playback - Sony DSR-2000AP Operating Instructions Manual

Playback

Preparations for Playback

Button/switch settings
MONITOR SELECT buttons (page 18) : select the audio channels to be monitored.
POWER switch: 1 side
PB controls (page 17) :
adjust the audio
playback levels.
Time data selection
This section describes playback of video and audio.
Before beginning playback, make any necessary button/switch settings.
For details of the settings of each of the buttons/switches, see the pages indicated
in parenthesis.
PB button (page 19) : lit
TC SELECT switch (page 27) : TC or VITC (when displaying time
code) (see the section "Displayed time data" on this page)
Displayed time data
Use the COUNTER SEL button to select one of counter's count
(COUNTER), time code (TC), and user bit values (U-BIT). When you
select time code, the data displayed is determined by the setting (TC/
VITC) of the TC SELECT switch on the subsidiary control panel as
follows.
TC SELECT switch setting
TC
VITC
REMOTE button (page 16) : unlit
COUNTER SEL button (page 19) :
select the data to be displayed
(see the section "Displayed time
data" on this page) .
Displayed data
TC recorded on tape
VITC recorded on tape
Chapter 3 Recording and Playback
49