Recording; Preparations For Recording - Sony DSR-2000AP Operating Instructions Manual

Recording

Preparations for Recording

Button/switch settings
MONITOR SELECT buttons (page 18) :
select the audio channels to be monitored.
POWER switch: 1 side
REC controls (page 17) :
adjust the audio recording levels.
REC INHIBIT switch (page 27) : OFF
INT/EXT–PRESET/REGEN switch (page 27) :
select the time code to be recorded.
Recording and
Playback
This section describes video and audio recording on the unit.
Before beginning recording, make any necessary button/switch settings.
For details of the settings of each of the buttons/switches, see the pages indicated
in parenthesis.
Input selection section (page 15) : select the input
video and audio signals.
PB/EE button (page 19) : lit
TC SELECT switch (page 27) : TC or VITC (when displaying time code)
VITC switch (page 27) : ON (when recording VITC)
3
Chapter
REMOTE button (page 16) : unlit
COUNTER SEL button (page
19) : select the data to be
displayed (counter's count, time
code value, or user bit value)
Chapter 3 Recording and Playback
45