Basic Menu Operations - Sony DSR-2000AP Operating Instructions Manual

Basic Menu

Basic Menu Operations

This section describes the basic menu display and how
to change the settings.
For information about how to use items B01 to B14, see the
section "Menu bank operations (menu items B01 to B14)"
(page 110).
Displaying the menu
MENU button
Press the MENU button.
The F FWD button and VARIABLE button light and
the setting of the currently selected menu item appears
in the display section of the lower control panel.
Item number (flashing)
To display the full item name
Hold down the F FWD button.
Item name
108
Chapter 6 Setup Menu
Display section
VARIABLE button
F FWD button
Setting
To display the item group name
Items in the menu are arranged in groups, by the 100's
digit of the item number. To display the name of the
group to which the currently selected item belongs,
hold down the VARIABLE button.
Item group name
To display menus on the monitor
Set the CHARACTER switch on the subsidiary control
panel to ON, then press the MENU button.
You can now view the menu as shown in the following
figure on a monitor connected to the VIDEO OUT 3
(SUPER) connector or SDI OUTPUT 3 (SUPER)
connector.
Group name for the
currently selected item
Cursor indicating the
*HO1:OPE HOURS
HO2:DRUM HOURS
currently selected
item
HOUR METER
- 102
- 52