User Interface - GE Dash 3000 Service Manual

Optional Alarm Light Indicator
Dash 3000 Monitor

User Interface

Flat Panel Display
Trim Knob Control
Power Key
2-6
Equipment Overview: Components
An optional alarm light indicator can be built into the handle of the Dash
3000 monitor or into the display bezel of the Dash 4000 monitor. When
activated, the LED indicator flashes red for Crisis patient status alarms
and yellow for Warning patient status and system alarms.
alarm light indicator
536A
The User Interface consists of a flat panel display and the keypad
assembly which consists of a Trim Knob, five function keys, and four
LED indicators.
The active-matrix color liquid crystal display (LCD) is assembled into a
shock absorbing isolator that fits within the monitor's front bezel to
protect the display from mechanical shock during use.
The acrylic optical filter protects the display panel from impact and
enhances visibility with its non-glare surface coating on the viewing side
of the filter. It also has a scratch-resistance surface coating.
The Trim Knob control is a 24-position rotary control with a push
selection switch.
The monitor is powered at all times when it is plugged into AC power.
When the monitor is not plugged in to AC power, this key turns the
monitor On and Off.
When AC power is present, this key toggles the operational mode of the
monitor between normal operation and stand-by mode. In standby mode
patient monitoring discontinues. Only the charging function continues
and the charging status indicators operate as described below.
Dash 3000/4000 Patient Monitor
2000966-339
Dash 4000 Monitor
052B
Revision A