Table of Contents
Advertisement
Flush all the water supply lines before making con nec tions. Debris in supply lines will cause the valves to
malfunction.
Hardware supplied by installer must be appropriate for wall construction. Wall anchors used must have a
minimum pull-out rating of 1,000 lbs.
Read this entire installation manual to ensure proper installation, then file these instructions with the owner
or maintenance department.
Product warranties may be found under "Products" on our web site at www.bradleycorp.com.
215-1330 Rev. N; ECN 16-08-022
© 2016 Bradley
Page 1 of 10
11/3/2016
CRS-3/IR/LSD
CRS-2/IR/LSD
WARNING
IMPORTANT
Installation
CRS-2/IR, CRS-3/IR
Express
Crescent
®
CRS-Series
Complies with Texas
Accessibility Standards (TAS)
for Juvenile Height applications.
Table of Contents
Dimensions ........................................................................2
Rough-Ins .......................................................................3-4
Supplies Required .............................................................5
Mount Bowl to Wall ............................................................5
Install Drain Spud ..............................................................5
Connect Supply .................................................................6
Electrical and Supply Connections ....................................6
Adjust the temperature ......................................................7
Install Top Cover ................................................................7
Cleaning and Maintenance ................................................8
Solenoid Valve Troubleshooting and Repair Parts .............9
Valve Troubleshooting and Repair Parts ........10
®
3-station unit is shown throughout. 2-station
is similar.
For soap system installation, refer to
installation manual 215-1583.
Menomonee Falls, WI 53052 USA
800 BRADLEY (800 272 3539)
+1 262 251 6000
Lavatory System
®
P.O. Box 309
bradleycorp.com
Advertisement
Table of Contents
Related Manuals for Bradley CRS Series
Summary of Contents for Bradley CRS Series
-
Page 1: Table Of Contents
Product warranties may be found under “Products” on our web site at www.bradleycorp.com. P.O. Box 309 215-1330 Rev. N; ECN 16-08-022 Menomonee Falls, WI 53052 USA © 2016 Bradley 800 BRADLEY (800 272 3539) +1 262 251 6000 Page 1 of 10 11/3/2016 bradleycorp.com... -
Page 2: Dimensions
TAS Ages 4 thru 10 or Subtract 4" *34" 11, Grades Pre-K thru (864) 5 or 6 & Proposed *20" Juvenile Height ADA (508) 24" Preschool (required Subtract 10" by some local codes) Bradley • 215-1330 Rev. N; ECN 16-08-022 11/3/2016... -
Page 3: Rough-Ins
Subtract 2" 30" TAS Ages 4 thru 10 or 11, Grades Pre-K thru 5 or 6 & Proposed Juvenile Height ADA Subtract 4" 24" Preschool (required by some local codes) Subtract 10" Bradley • 215-1330 Rev. N; ECN 16-08-022 11/3/2016... - Page 4 Subtract 2" 30" TAS Ages 4 thru 10 or 11, Grades Pre-K thru 5 or 6 & Proposed Juvenile Height ADA Subtract 4" 24" Preschool (required by some local codes) Subtract 10" Bradley • 215-1330 Rev. N; ECN 16-08-022 11/3/2016...
-
Page 5: Supplies Required
• 110 VAC power source for 110/12VDC regulated wall adapter (supplied) • OPTIONAL TRAP COVER: 1/4" wall anchor, bolt and washer to mount trap cover to wall • OPTIONAL: Bradley recommends installing an electrical cut-off switch to the unit (this feature prevents accidental water delivery during regular maintenance and service) Mount Bowl to the wall WARNING Do not attempt to install the bowl alone. -
Page 6: Connect Supply
Red Supply the valve bracket. Tube (From Sprayhead) Snap the wall adapter barrel plug into the barrel plug located on the valve bracket wire harness. Compression (110-231) Supply Inlet Navigator Thermostatic Mixing Valve Bradley • 215-1330 Rev. N; ECN 16-08-022 11/3/2016... -
Page 7: Adjust The Temperature
Optional Soap Dispenser: Install Top Cover soap filler assembly in mounting Bracket bracket previously installed. Tighten (140-852) the optional soap filler cap nut with a spanner wrench. Wing Nut (161-076) Bradley • 215-1330 Rev. N; ECN 16-08-022 11/3/2016... -
Page 8: Cleaning And Maintenance
Avoid contact with hot pans and objects. Repair Kits: Terreon repair kits are available. Contact your Bradley representative or distributor for part numbers and pricing. Repair kits are made to order and have a shelf life of 30 days. -
Page 9: Solenoid Valve Troubleshooting And Repair Parts
• reconnect to the adjacent valve and turn on the water supplies to the unit; • pass your hand in front of the sensor. If the station still fails to turn on, replace the sensor. Bradley • 215-1330 Rev. N; ECN 16-08-022 11/3/2016... -
Page 10: Navigator ® Valve Troubleshooting And Repair Parts
198-014 Check Valve* 132-051 Retaining Ring* 118-319 Valve Body 146-079 U-Clip * Included with Prepack S65-326 Tempered Line Adapter Option Part no. S39-804 (replaces S59-4000 if tempered line is used) Strainer (173-028) Bradley • 215-1330 Rev. N; ECN 16-08-022 11/3/2016...
Need help?
Do you have a question about the CRS Series and is the answer not in the manual?
Questions and answers