Honeywell Accenta Series Engineer's Manual page 37

Accenta/Optima Engineer's Manual
LED Keypad:
Press [CHIME] to toggle omit allow status on or off.
Press [9] to turn all omit allow zones on.
Press [0] to turn all omit allow zones off.
• Press [OMIT] to enter into menu. LED 2 is on.
• Press [2] to select Omit Allow.
• Press zone number [1-8] to choose a particular zone.
• Press the [zone number] or [CHIME] to toggle the omit allow
status on or off. The appropriate LED is on when the zone is
set up as omit allow. Default settings are off.
• Press [RESET] twice to leave the menu.
Omit Allow & Double Knock
33
[OMIT]
1 2 3 4 5 6 7
[2]
1 2 3 4 5 6 7
[1-8] or [CHIME]
4 5 7
1 2 3 6
[RESET]
3 4 5 6 7
1 2
8
8
8
8