Honeywell Accenta Series Engineer's Manual page 30

Timers (cont'd)
72 = Set Up Bell Delay
This delays the activation of the Bell for the required time. The range is 00-99 minutes. The default is 00
minutes.
NOTE: The Bell Delay delays the bell for one rearm period only. After rearm all alarms are immediate.
LCD keypad:
To change the Bell Delay time from 00 to 12 minutes:
• Press [up arrow] for menu Set Up Timers.
• Press [7]or [SET]. Option 1 Set up Bell Time appears.
• Press [2]. The Bell Delay time in minutes is displayed.
• The cursor is under the first digit. Select [1].
• The cursor moves to the second digit. Select [2].
• To accept the change press [SET] then [RESET]
OR to cancel the change press the [RESET] button twice.
LED keypad:
To change the Bell Delay time from 00 to 12 minutes:
• Press [7] to enter Set up Timers.LED's 1, 2 and 3 are
on.
• Press [2] for Bell Delay time in minutes. LED's 1and 2
are on.
• Select [1] then [2]. LED's 1 and 2 are on.
• To accept the change press [SET]. LED's 1, 2 and 3
are on. Press [RESET].
OR to cancel the change press the [RESET] button
twice.
Accenta/Optima Engineer's Manual
7>Set Up 7>Set Up
7>Set Up 7>Set Up 7>Set Up
71>Set Up 71>Set Up 71>Set Up 71>Set Up 71>Set Up
Bell Delay Bell Delay
Bell Delay Bell Delay Bell Delay
Minutes? 00 Minutes? 00 Minutes? 00 Minutes? 00 Minutes? 00
Bell Delay Bell Delay
Bell Delay Bell Delay Bell Delay
Minutes? 12 Minutes? 12 Minutes? 12
Minutes? 12 Minutes? 12
[SET] then [RESET] or [RESET]
7>Set Up 7>Set Up
7>Set Up 7>Set Up 7>Set Up
26
[up arrow]
Timers Timers Timers Timers Timers
[7] or [SET]
Bell Time Bell Time
Bell Time Bell Time Bell Time
[2]
[1] and [2]
Timers Timers Timers Timers Timers
[7]
3 4 5 6 7
1 2
[2]
1 2 3 4 5 6 7
[SET] then [RESET]
1 2 3 4 5 6 7
or [RESET]
1 2 3 4 5 6 7
8
8
8
8