Honeywell Accenta Series Engineer's Manual page 31

Accenta/Optima Engineer's Manual
73 = Set Up Rearm Count
After an alarm the panel will automatically rearm itself when the external siren (Bell) timer has expired. Any
zones which still remain open at that time will be automatically omitted . The default is 3 rearms.
0 = no rearms
1-8 = number of rearms
9 = always rearm
LCD keypad:
To change the Rearm Count:
• Press [up arrow] for menu Set Up Timers.
• Press [7]or [SET]. Option 1 Set up Bell Time appears.
• Press [3]. The Rearm Count is displayed (default 3).
• Select a number [0 - 9] to change the rearm count.
• To accept the change press [SET] then [RESET]
• OR to cancel the change press the [RESET] button twice.
LED Keypad:
To change the Rearm Count:
.
• Press [7] to enter Set Up Timers.LED's 1, 2 and 3 are on.
• Press [3] for Rearm Count. LED 1 is on.
• Select a number [0 - 9] to change the rearm count.
• To accept the change press [SET]. LED's 1, 2 and 3 are
on. Press [RESET].
OR to cancel the change press the [RESET] button twice.
Timers (cont'd)
7>Set Up 7>Set Up 7>Set Up
7>Set Up 7>Set Up
71>Set Up 71>Set Up 71>Set Up 71>Set Up 71>Set Up
Rearm Count Rearm Count Rearm Count Rearm Count Rearm Count
3 3 3 3 3
73>Set Up 73>Set Up
73>Set Up 73>Set Up 73>Set Up
7>Set Up 7>Set Up 7>Set Up 7>Set Up 7>Set Up
[SET] then [RESET] or [RESET]
27
[up arrow]
Timers Timers Timers Timers Timers
[7] or [SET]
Bell Time Bell Time Bell Time
Bell Time Bell Time
[3]
[SET] then [RESET]
Rearm Count Rearm Count Rearm Count
Rearm Count Rearm Count
or [RESET]
Timers Timers
Timers Timers Timers
[7]
4 5
1 2 3 6
[3]
4 5
1 2 3 6
[Number]
1 2 3 4 5 6
1 2 3 4 5 6 7
7 8
7 8
7 8
8