Using Finger Touch Interactivity - Epson BrightLink 595Wi Initial Training

How Does the BrightLink™ Interactive
Projector Work?

Using Finger Touch Interactivity

Once your Touch Unit is installed, it will be automatically turned on when you turn
on the BrightLink. The blue light on the Touch Unit will remain on. In PC Mode,
your finger will take the place of the mouse at your computer. The BrightLink will
recognize up to six multi-touch points.
To Use Your Finger:
1. Hold your finger perpendicular to the interactive surface. Avoid having
other fingers or your thumb unintentionally touch the surface. Be aware
that loose clothing may also generate unintentional commands.
2. Select an icon from the Command Bar or Drawing Toolbar to use a tool or
perform a function.
3. When using touch interactivity with multiple users, all finger users must use
the same tool (Ex. If one person selects a pen tool, everyone must use that
pen tool).
© 2016 IVS Computer Technology®, Inc. All rights reserved
25