Epson PowerLite Home Cinema 5030UBe Declaration Of Conformity

According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or CPU Boards and
Power Supplies used with Class B Personal Computers
We: Epson America, Inc.
Located at: 3840 Kilroy Airport Way, MS 3-13, Long Beach, CA 90806
Telephone: (562) 981-3840
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of
the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested
and found to be compliant with the standards. Records maintained continue to reflect the equipment being
produced can be expected to be within the variation accepted, due to quantity production and testing on a
statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Trade Name: Epson
Type of Product: Projector
Model: H586A
Marketing Name: PowerLite Home Cinema 5030UBe
WirelessHD Transmitter Bluetooth Safety and
Contains WirelessHD module model: AW-WH064R
U.S.

FCC Notices

Contains FCC ID: TLZ-WH064T
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment. To comply with RF exposure compliance requirements, a
separation distance of at least 7.9 inches (20 cm) must be maintained between the antenna of this device and
all persons. This antenna of this device must not be co-located or used in conjunction with any other antenna
or transmitter.
The cable for peripheral with a ferrite core must be used for RF interference suppression.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.

Declaration of Conformity

Specifications