Epson BrightLink 595Wi Initial Training page 20

Windows operating system

Hide thumbs Also See for BrightLink 595Wi:

Table of Contents

4. Adjust the image focus if necessary.

5. Press Enter to select Yes. A flashing green circle will appear in the upper

left corner of your projected image.

6. Touch the center of the circle with the tip of the pen. The circle will

disappear and you will see another circle appear below the first one.

7. Touch the center of the next circle, then repeat. When you get to the

bottom of a column, the next circle will appear at the top of a new column.

8. Continue until all of the circles disappear.

NOTE: Make sure you touch the center of each circle for the most accurate

calibration.

Table of Contents