Epson BrightLink 595Wi Initial Training page 24

Windows operating system

Hide thumbs Also See for BrightLink 595Wi:

Table of Contents

6. Press Enter to select Yes. A flashing green circle will appear in the upper

left corner of your projected image.

7. Touch and hold the center of the circle with your finger until the circle

disappears and another circle appears, then release it.

8. Touch and hold the center of the next circle and continue until all of the

circles have disappeared. When you get to the bottom of a column, the

next circle will appear at the top of a new column.

9. If the cursor location and your finger position do not match after calibration,

repeat the pervious steps to recalibrate.

NOTE: For the most accurate calibration make sure you touch the center of each

circle with the tip of your finger.

Table of Contents