How Does the BrightLink™ Interactive
Projector Work?
Finger Touch Interactivity Calibration
Before you begin using the BrightLink™ interactive projector with the Touch Unit,
you will need to perform a calibration to coordinate the position of your finger with
the location of the cursor. You only need to perform the calibration the first time
you use the interactive features of the projector. The calibration results will
remain until you calibrate again. Make sure that you calibrate the interactive pen
before you perform the finger touch calibration. Perform the calibrations again if
you notice positioning discrepancies after performing a Keystone correction,
adjusting the image size, using the Image Shift feature, or moving the projector.
Manual Calibration – Finger Touch Interactivity
1. Press the Menu button, select the Extended menu, and select Enter.
2. Select the Easy Interactive Function setting and press Enter.
© 2016 IVS Computer Technology®, Inc. All rights reserved
22