Using Finger Touch Interactivity - Epson BrightLink 710Ui User Manual

7. Touch the center of the next circle, then repeat. When you get to the bottom of the column, the next
circle appears at the top of a new column.
Note: If you make a mistake, press the Esc button on the remote control or control panel to go back
to the previous circle. To restart the calibration process, press and hold the Esc button for 2
seconds.
8. Continue until all of the circles disappear.
Parent topic:

Using Finger Touch Interactivity

You can use your finger to perform the same functions as the interactive pens when you install the
Touch Unit.
Note: See the Touch Unit and Control Pad Installation Guide for detailed instructions on installing the
Touch Unit and calibrating for finger touch interactivity.
Touch Unit Safety Instructions
Calibrating for Finger Touch Interactivity
Using Finger Touch Operations
Parent topic:
Pen Calibration
Using the Interactive Features
182