Important Safety Information; Receiving The Guzzler; Guzzler Setup - Aztec GUZZLER Owner's Manual

IMPORTANT SAFETY INFORMATION

The Guzzler is the ultimate in high-speed recovery of scrubbing and stripping solutions. The Guzzler's
30" squeegee path retrieves solution at a rate of up to 30,000 sqft/hour. That's TWICE the speed of the
other conventional recovery methods and will not create additional foaming. The Guzzler is the "Step
Three" of the
Aztec WorkSmart Sidewinder Stripping
solution applicator), the Sidewinder (propane floor stripper), and the Grand Finale (finish applicator).
Recommended surfaces for the Guzzler include:
➢ Vinyl and ceramic tile
➢ Sealed or finished concrete floors
➢ Wood, stone and terrazzo
The Guzzler is not recommended for any other use. Call Aztec (800) 331-1423 for additional application
questions.
All of Aztec's machines proudly

RECEIVING THE GUZZLER

1) Inspect for obvious shipping damage or missing parts.
2) Chassis – pump plate, squeegee, and wheel condition.
3) Parts – handle hardware is in parts bag located inside solution tank.
4) Any damage or missing parts must be reported to Aztec Products within seven working days of
receiving the equipment.

GUZZLER SETUP

Mount Handle Assembly
1) Install (4) studs into inserts on rear of tank.
2) Install (1) nylon spacer on each stud.
3) Install (1) washer on each stud.
4) Install handle onto studs, then add (1) washer on each.
5) Install hex nuts – Do not over tighten, or damage may occur.
6) Mount handle, re-install washer, then nut, and tighten.
12-2018
MADE IN THE USA.
GUZZLER OWNER'S MANUAL PAGE 4
System, which includes the Liquidator (strip