PG. 1 SIDEWINDER I. TRANSPORT AND STORAGE II. POWERED EQUIPMENT PREPARATION A. Familiarize yourself with equipment by reading A. To transport the Sidewinder (not operating) it is necessary to tilt the machine back on the rear wheels manuals and identifying components and controls. so brushes (or pads) are not in contact with the floor.
(4 ROW) .080 dia. Malgrit-Xtra bristles last longer. The Aztec Sidewinder is designed to deep scrub and/or Lasts up to 1-1.5 million sq. ft. strip hard surface floors in preparation for top coat or restoring of tile, smooth concrete, terrazzo or close SW 30"...
Check all connections visibly and physically. If any Reads up to 6,000 R.P.M. “loose”, damaged or unconnected wires are noticed, contact Aztec and/or put wires back in their proper place. IX. OPERATING INSTRUCTIONS B. Always wear a face shield, safety glasses and protective A.
Page 5
Do not remove the six (6) 3/4" head bolts from the bottom should be kept in “new” condition both physically and of the machine unless you have talked to Aztec technical mechanically to ensure a minimum down-time factor. support. Note: If the engine runs, but the brushes do not...
Page 6
Honda is warranted for 2 years. The Onan engines are warranted for 3 years but can be extended to 5 years. Aztec Products, Inc. agrees, at its discretion, to repair or replace at its own expense any product or part(s) which examination proves to be defective in workmanship or materials provided that the purchaser notifies Aztec Products, Inc.