Table of Contents
Related Manuals for Aztec Grand Finale
Summary of Contents for Aztec Grand Finale
- Page 1 OWNER’S MANUAL Grand Finale Finish Applicator 24”/36” (61cm/92cm) WARNING READ THESE INSTRUCTIONS BEFORE USING 201 COMMERCE DRIVE • MONTGOMERYVILLE, PA 18936 215-393-4700 • 800-331-1423 • FAX 215-393-4800 www.aztecproducts.com...
-
Page 2: Grounding Instructions
DO NOT MODIFY THE PLUG PROVIDED. 1. Attach the head assembly and the pad holder USE ONLY A 3-WIRE EXTENSION CORD to the front of the Grand Finale. THAT HAS A 3-PRONG GROUNDING PLUG AND A 3-POLE RECEPTACLE THAT 2. Insert the lift handle through the lift handle... -
Page 3: Preparing For Operation
GRAND FINALE PG. 3 OPERATING TIPS 4. Open the Grand Finale body by removing the two screws in the bucket shelf. Hook up the 1. Turn flow control switch to zero, 10 feet battery according to instructions on the base before finishing an area to minimize dripping. -
Page 4: Cleaning And Storage
15 seconds or until manifold is clean. 3. If Grand Finale will be used within a short period of time, the head cover may be placed 12. Disconnect suction hose and turn control... -
Page 5: Troubleshooting
1. Charge battery by connecting the power cord to the power inlet on the back side of the INFORMATION Grand Finale. Connect the power cord into a 120v grounded outlet. The GREEN light will IMPORTANT come on when the power is connected. Allow battery to charge until "charged"... - Page 6 PG. 6 GRAND FINALE GRAND FINALE BODY PARTS LIST PART # DESCRIPTION 050-270 Quick Coupling Body 050-320 Hose Clamp (Steel) 050-120 Check Valve 050-230 Axle Bumper 283-050-185 Axle Sensor Bracket 050-140 Axle Sensor 050-151 Suction Tube Assembly 050-310 Hose Clamp (Nylon)
- Page 7 GRAND FINALE PG. 7 GRAND FINALE HEAD ASSEMBLY PARTS LIST PART # DESCRIPTION 283-050-210 24” Drip Tray 283-050-210 36” Drip Tray 050-440-24 24" Head Cover 050-440 36" Head Cover 050-24-C 24” Thin Microfiber Pad 050-24-F 24” Looped Microfiber Pad 050-36-C 36"...
-
Page 8: Protect Your Warranty
Aztec Products, Inc. agrees, at its option, to repair or replace at its own expense any product or part(s) which examination proves to be defective in workmanship or materials provided that the purchaser notifies Aztec Products, Inc.