Disassembly/Assembly - Makita LW1400 Technical Information

5-3

DISASSEMBLY/ASSEMBLY

5-3-1 Armature
5-3-1-1 Disassembling
Fig. 1-1
Remove Carbon brush (45).
1)
Unscrew seven M5×40 P.H. screws (34, 46) and
2)
remove Motor section with handle section from the
main unit.
5-3-2 Handle section
5-3-2-1 Disassembling
Fig. 2-1
Unscrew four 4×18 Tapping screws (32) and three
1)
M5×40 P.H. Screws (34) and remove Handle L (30).
5-3-2-2 Assembling
Fig. 2-3
Set Switch lock (26), Switch lever (25) and
1)
Compression spring 4 (27) in place.
Switch lock (26)
Switch lever (25)
Note: Be careful not to lose off
Stopper (55).
Handle L (30)
Note: Fix Switch button
(31) after Handle L (30)
is installed.
Compression
spring 4 (27)
Makita Corporation
Pull out Armature (51) by hand.
3)
Pull out Ball bearing (50, 54) with 1R269.
4)
Fig. 2-2
Remove Power supply cord (40) and Switch (24) etc.
2)
Power supply cord (40)
Fig. 2-4
Press Switch button (31) into Handle L (31) with a
2)
click sound.
Fig. 1-2
Armature (51)
Switch (24)
Switch
button (31)
Handle L (31)
5 / 15