The component of Guide plate is as follows.
4)
Stop ring E-8 (110)
Thin washer 10 (109)
Thrust needle cage
1024 (108)
5-3-5-2 Assembling
Fig. 5-5
Mount Lever 125 (101) to Guide plate (73) and
1)
then fix it with M5x6 H.S.Set screw (100).
Lever 125 (101)
Guide base (111)
Thin washer 10 (107)
M5x6 H.S.Set screw (100)
Guide plate (73)
Fig. 5-4
Thin washer 10 (106)
Thrust needle cage
1024 (105)
Flat washer10 (102)
M10x20 Collar bolt (71)
Lever 125 (101) must be mounted within 20 degrees from
2)
perpendicular to the surface of Base (86).
Within 20°
Makita Corporation
Flat washer 10 (104)
Sleeve 11 (103)
Knob 40 (72)
Lever 125 (101)
M5x6 H.S.Set screw (100)
Fig. 5-6
Lever 125 (101)
Base (86)
10 / 15