System Time - Garmin G1000 Pilot's Manual

SYSTEM TIME

The system time is displayed in the lower right corner of the PFD. Three display formats are available, local
12-hr, local 24-hr, and Coordinated Universal Time (UTC). Time and date are obtained from the GPS satellites
and cannot be changed, although a time offset may be entered (±HH:MM) for local times.
Configuring the system time:
1) Select the AUX - System Setup Page using the FMS Knob.
2) Press the FMS Knob to activate the cursor. 'Time Format' is highlighted.
3) Turn the small FMS Knob to select the desired format.
4) Press the ENT Key to confirm selection. 'Time Offset' is highlighted.
5) Enter the desired time offset (±HH:MM).
6) Press the ENT Key to confirm selection.
190-00498-01 Rev. A
Figure 2-33 System Time
Figure 2-34 System Setup Page,
Date/Time Settings
Garmin G1000 Pilot's Guide for Cessna Nav III
FLIGHT INSTRUMENTS
2-23