Garmin G1000 Pilot's Manual page 242

GPS NAVIGATION
7) Press the ENT Key. 'LOAD? or ACTIVATE?' is now displayed with 'LOAD?' highlighted. Selecting 'LOAD?' will
enter the selected approach procedure into the active flight plan, but will not be currently active. Selecting
'ACTIVATE?' will enter the selected approach procedure into the active flight plan and make it immediately
active.
8) Turn the large FMS Knob to select either 'LOAD?' or 'ACTIVATE?'.
9) Press the ENT Key.
OR:
1) Select the Nearest Airports Page.
2) Select the desired nearest airport.
3) Press the APR Softkey located at the bottom of the display. The 'LD APR' (load approach) Softkey becomes
available.
4) Select the desired approach.
5) Press the LD APR Softkey. The Approach Loading Page is displayed with the transitions field highlighted.
6) Select the desired transition.
7) Press the ENT Key. The 'LOAD?' field is highlighted.
5-106
Figure 5-91 WAAS Channel Number and ID
Figure 5-92 Not Approved for GPS Message
Garmin G1000 Pilot's Guide for the Cessna Nav III
WAAS Channel
Number
WAAS Approach ID;
10 = Runway 10;
A = 1st WAAS Approach
W = WAAS;
to Rwy 10
190-00498-01 Rev. A