Garmin G1000 Pilot's Manual page 109

AUTO-TUNING FROM THE MFD
Frequencies can be automatically loaded into the COM Frequency Box from pages in the NRST or WPT
page group by highlighting the frequency and pressing the ENT Key (Figures 4-11, 4-12, and 4-13).
Auto-tuning a COM frequency from the MFD:
1) From any page that the COM frequency can be auto-tuned, activate the cursor by pressing the FMS Knob or the
appropriate softkey.
2) Turn the FMS Knob to place the cursor on the desired COM frequency (Figure 4-13).
3) Press the ENT Key to load the COM frequency into the standby field of the selected COM radio.
4) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.
Turn the FMS
Knob to Scroll
Through a List
of Frequencies
OR:
5) Press the MENU Key to display the PAGE MENU (Figure 4-12).
6) Turn the large FMS Knob to scroll through the OPTIONS Menu.
7) Press the ENT Key to place the cursor on the desired selection.
8) Scroll through the frequency selections with the FMS Knob or the ENT Key.
9) Press the ENT Key to load the COM frequency into the standby field of the selected COM radio.
10) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.
190-00498-01 Rev A
Press the ENT
Key to Load
a Highlighted
Frequency into
the COM Standby
Frequency Box
Figure 4-11 Frequency Auto-Tuning from the MFD
Figure 4-12 Nearest Pages PAGE MENU
Garmin G1000 Pilot's Guide for Cessna Nav III
AUDIO PANEL AND CNS
4-11